CGM Anti-Denial Campaign Website

All you need to fight for CGM coverage.

CY-15A ball transfer unit,10kg load capacity ,flange carbon steel unit

The application of self lubricating bearing in casting
linear rails and slides use of wide temperature, content of solid lubricating materials is adequate, release the un orm, good self-lubricating property and bite, can effectively protect the journal, to achieve durable use.Suitable for high temperature, low speed, large overload, dust, water and shock vibration environment operation, can be widely used in mining machinery, metallurgy, petroleum, chemical, food, textile, papermaking, printing and dyeing machinery and equipment, such as rolling and sliding bearing parts.
Of aluminium electrolytic tank to produce aluminum liquid, with carry bag vacuum out pour bimetallic self-lubricating bearing to the hybrid furnace, after matching and slag into aluminium ingot casting machine casting forming, the forming of solid aluminum ingots, the production of aluminum ingots stacking by the stacker.In order to improve the production efficiency, aluminum molding must be used before a large amount of cooling water for cooling, in the great heat released into the aluminous liquid during the cooling process of cooling water, hot water vapor is produced.
Casting machine under high temperature and water environment bearing, bearing a lot of grease lubrication, grease is added in a short period of time will be because of the high temperature melt the overflow, the maintenance is d ficult, d ficult on health and the equipment surface.In the steel structure bearing the heat, the environment of wet wet solid lubrication bearing is easy to rust, corrosion failure rate is very high, high cost of equipment maintenance, equipment operation often troubled by the following two problems.
Oil supply operation is d ficult to achieve high temperature continuous casting machine spindle, YiDing, ingot, such as cu composite bushing are installed in the frame, each rotation bearing design of lubricating grease injection nozzle facilities on a regular basis, oil must stop when the demolition of housing, oil gun pressure grease.And the whole machine injection point up to more than 30, long-term operation maintenance cannot achieve this tedious filling operation, so we have to hand dilute oil can pour water on the outside of the running bearing sleeve, it is d ficult to enter the bearing lubricating oil between the friction pair, most of the bearing under friction.
Ambient temperature is high, the grease lubrication not adapt to the present casting machine used in the rolling bearing molybdenum disulfide grease is considered capable of high temperature grease, we know the base oil is oil products,CY-15A ball transfer unit,10kg load capacity ,flange carbon steel unit add a small amount of high temperature resistance of molybdenum disulphide additives, its heat resistance limit is 120 ℃.Casting machine according to the measured bearing working temperature is 200 ℃, has far beyond the limit of heat-resistant grease.

Views: 2

Reply to This

© 2017   Created by Gina Capone.   Powered by

Badges  |  Report an Issue  |  Terms of Service